STS2-35
Short Description:
The STS2 multipurpose terminal blocks comply with the international standard IEC60947-7-1. Use screws with hexagonal socket. cross section: 2.5-300 mm2. Color: White
Advantage
The ribbing of clamping part lower contact resistance of the contact surface
Can be mounted on TH35 DIN rails.
STS2-35
| Type | STS2-35/4X10 | STS2-35/9X4 | STS2-35/6X6 | STS2-35/2X25 |
| L/W/H | 78*21*53 mm | 78*21*53 mm | 78*25.2*53 mm | 78*21*53 mm |
| Wire Type | 1 input 4 output | 1 input 9 output | 1 input 6 output | 1 input 2 output |
| Input Section | 35 mm2 | 35 mm2 | 35 mm2 | 35 mm2 |
| Output Section | 2.5~10 mm2 | 1.5~4 mm2 | 1.5~6 mm2 | 6~25 mm2 |
| Input Screw | M8 | M8 | M8 | M8 |
| Output Screw | M6 | M4 | M4 | M8 |
| Input Stripping Length | 20 mm2 | 20 mm2 | 20 mm2 | 20 mm2 |
| Output Stripping Length | 10 mm2 | 8 mm2 | 8 mm2 | 11/24 mm2 |
Wiring Diagram
Structural Features
STS2 distribution terminal block is made of conductive parts, bench insulator and protective cover, compact size, reliability structure.
The line can connect to the port directly, and also can connected with copper bar below the 30mm. The bottom of screw is inner hexagon screw, will not hurt the wire, and have enough power to extrusion.
Install and use
This series have two ways to install:
1.Punching bottom plat to install
2.Installed on the TH35-7.5 raill. Suggested use split conductor
|
Model |
Wire Type |
Section mm2 |
Size mm L/W/H |
Screw |
Stripping Length |
|
STS2-35/4X10 |
1 Input 4 Output |
Input 35 Output 2.5-10 |
78*21*53 |
Input M8 Output M4 |
In 20 Out 10 |
|
STS2-35/9X4 |
1 Input 9 Output |
Input 35 Output 1.5-4 |
78*21*53 |
Input M8 OutputM4 |
In 20 Out 8 |
|
STS2-35/6X6 |
1 Input 6 Output |
Input 35 Output 1.5-6 |
78*25.2*53 |
Input M8 Output M4 |
In 20 Out 8 |
|
STS2-50/2X25 |
1 Input 2 Output |
Input 50 Output 6-25 |
78*21*53 |
Input M8 Output M8 |
In 20 Out 11/24 |
The STS2 series branch terminal blocks are specially designed for wiring in a wide range of electrical control distribution equipment, complete device sets, and combination terminal electrical enclosures. With a rated insulation voltage of 690V and a rated operating voltage of 380V, these terminal blocks can accommodate incoming wires with a maximum cross-sectional area ranging from 25mm² to 300mm². The product boasts a unique and innovative design, ensuring secure and dependable wire connections, while also offering flexibility and convenience in usage. It finds utility in various electrical applications, including busbars, high-current terminals, neutral connections, grounding terminals, as well as equipotential terminals.
This product fully adheres to the standards of IEC 60947-7-1, GB 14048.7, and JB/T 9659.1. Every type of test has successfully met the stringent quality check
