Featured Products

  • ST2 Earth Push In Terminal Block

    ST2 Earth Push In Terminal Block

    The ST2 earth terminal block comply with the international standard IEC60947-7-1.

    Ground terminal block, connection method: Push-in connection, cross section: 2.5 mm2 - 10 mm2, mounting type: NS 35/7,5, NS 35/15, color: green-yellow

    Advantage

    Tool-free wiring of conductors with ferrules or solid conductors

    Widely used in railway system

    Additional labeling options

    Low contact resistance

    Corrosion-free terminal points

    suk

  • ST2 Feed Through Push In Terminal Block

    ST2 Feed Through Push In Terminal Block

    The ST2 Feed-through terminal blocks comply with the international standard IEC60947-7-1.

    Connection method: Push-in connection, cross section: 2.5-10 mm2, mounting type: NS 35/7,5, NS 35/15, color: grey

    Advantage

    Tool-free wiring of conductors with ferrules or solid conductors

    Cross connection to any number of terminal blocks with the consistent UFB plug-in bridge system

    Compact potential distributors, the double connection enables four conductors to be connected on one potential

    Widely used in railway system

    suk

  • ST2 1-IN-2-OUT Terminal Block

    ST2 1-IN-2-OUT Terminal Block

    The ST2 1-IN-2-OUT terminal blocks comply with the international standard IEC60947-7-1.

    Feed-through terminal block, connection method: Push-in connection, cross section: 4 mm2, mounting type: NS 35/7,5, NS 35/15, color: grey

    Advantage

    Tool-free wiring

    Time-saving distribution and space-saving design with multi-conductor connection

    User-friendly implementation of all potential branching tasks

    Widely used in railway system

    Compact design and front connection

    suk

  • ST2 2-IN-2-OUT Terminal Block

    ST2 2-IN-2-OUT Terminal Block

    The ST2 2-IN-2-OUT terminal block comply with the international standard IEC60947-7-1.

    Feed-through terminal block, connection method: Push-in connection, cross section: 2.5-4 mm2, mounting type: NS 35/7,5, NS 35/15, color: grey

    Advantage

    Cross connection to any number of terminal blocks with the consistent UFB plug-in bridge system

    Compact potential distributors, the double connection enables four conductors to be connected on one potential

    Time-saving distribution and space-saving design with multi-conductor connection

    Tool-free wiring of conductors with ferrules or solid conductors

    Widely used in railway system

    suk

  • ST2 Double level Terminal Block

    ST2 Double level Terminal Block

    The ST2 Double-level push-in terminal block comply with the international standard IEC60947-7-1.

    Feed-through terminal block, connection method: Push-in connection, cross section:2.5-4 mm2, mounting type: NS 35/7,5, NS 35/15, color: grey

    Advantage

    Connect the levels using UFB,PV bridges

    Compact design and front connection

    Tool-free wiring of conductors with ferrules or solid conductors

    Widely used in railway system

    suk

  • ST2 Multi-Level Terminal Block

    ST2 Multi-Level Terminal Block

    The ST2 Multi-level terminal block comply with the international standard IEC60947-7-1.

    Cross section:  2.5mm2. connection method: Push-In connection, mounting type: NS 35/7,5, NS 35/15, color: grey

    Advantage

    Cross connection to any number of terminal blocks with the consistent UFB plug-in bridge system

    Tool-free wiring of conductors with ferrules or solid conductors

    Widely used in railway system

    Can be labeled on every level

    suk

  • PTTB 2.5 Double-Layer Push-in Spring Connection DIN Rail Phoenix Ground Terminal Blocks

    PTTB 2.5 Double-Layer Push-in Spring Connection DIN Rail Phoenix Ground Terminal Blocks

    The ST2 Double-level push-in terminal block comply with the international standard IEC60947-7-1.

    Feed-through terminal block, connection method: Push-in connection, cross section:2.5-4 mm2, mounting type: NS 35/7,5, NS 35/15, color: grey

    Advantage

    Connect the levels using UFB,PV bridges

    Compact design and front connection

    Tool-free wiring of conductors with ferrules or solid conductors

    Widely used in railway system

    suk

  • Factory Promotional SIPUN test disconnect Terminal Block

    Factory Promotional SIPUN test disconnect Terminal Block

    The SUK Test disconnect terminal blocks comply with the international standard IEC60947-7-1. Screw connection. cross section:  2.5-6mm2. Color: grey

    Advantage

    Easy and clear testing in current transformer secondary circuits can be performed using the test disconnect terminal blocks

    Easy connection by using central bridges and jumpers

    Can be mounted on TH35 and G32 DIN rails

    Quick marking by using marker strip ZB

    suk

  • Factory Free sample Universal PUSH-IN DIN Rail Terminal Blocks

    Factory Free sample Universal PUSH-IN DIN Rail Terminal Blocks

    The ST2 2-IN-2-OUT terminal block comply with the international standard IEC60947-7-1.

    Feed-through terminal block, connection method: Push-in connection, cross section: 2.5-4 mm2, mounting type: NS 35/7,5, NS 35/15, color: grey

    Advantage

    Cross connection to any number of terminal blocks with the consistent UFB plug-in bridge system

    Compact potential distributors, the double connection enables four conductors to be connected on one potential

    Time-saving distribution and space-saving design with multi-conductor connection

    Tool-free wiring of conductors with ferrules or solid conductors

    Widely used in railway system

    suk

  • ST2 Fuse Push In Terminal Block

    ST2 Fuse Push In Terminal Block

    The ST2 Fuse terminal blocks comply with the international standard IEC60947-7-1.

    Connection method: Push-in connection, Fuse type: Flat, cross section: 2.5mm2, mounting type: NS 35/7,5, NS 35/15, color: grey

    Advantage

    Tool-free wiring of conductors with ferrules or solid conductors

    2 IN 2 OUT Design

    Widely used in railway system

    suk